This paragraph is the final paragraph.
"DEEP MY WORLD"is my first English world,
so I has many memory of it.
I am glad to write English blog,
it was very interesting!
But this paragraph is final, I felt a little sad.
Goodbye! My first English blog!
You gave me a good memory!
Thank you!
Saturday, May 30, 2009
freewriting-About Lathe thrid Day
The third day, it was this semester last plant practice,
lathe worker's work piece said that must complete is only then good.
This morning I take the tool which and the inspection book on the ahead of time the lathe must use,
I as if can complete in today the work piece,
but actually does not have the means.
I really thought that this time will not violate anything to be greatly wrong again,
but I mistakenly,
in the first several steps I forgot the work piece size,
it was the fatal mistake.
The third day ended.
lathe worker's work piece said that must complete is only then good.
This morning I take the tool which and the inspection book on the ahead of time the lathe must use,
I as if can complete in today the work piece,
but actually does not have the means.
I really thought that this time will not violate anything to be greatly wrong again,
but I mistakenly,
in the first several steps I forgot the work piece size,
it was the fatal mistake.
The third day ended.
freewriting-About Lathe Second Day
The second day of practice,
I study the content which very earnestly says discusses,
the wish can do very much today smoothly.
But because of the previous operation time because of impatient causes pitiful experience,
therefore my speed is very slow.
At that time I when turning has thought the work piece rubs to the lathe tool when sends out the
sound grating very much is loud,
I wanted possibly to be the turning method mistakenly,
therefore I tried to raise crank's speed, the really grating sound did not have.
Second day of almost had also ended, the progress had progresses.
I study the content which very earnestly says discusses,
the wish can do very much today smoothly.
But because of the previous operation time because of impatient causes pitiful experience,
therefore my speed is very slow.
At that time I when turning has thought the work piece rubs to the lathe tool when sends out the
sound grating very much is loud,
I wanted possibly to be the turning method mistakenly,
therefore I tried to raise crank's speed, the really grating sound did not have.
Second day of almost had also ended, the progress had progresses.
freewriting-About Lathe Frist day
The lathe is the one of use most widespread machines, and it is also an machine I most curious.
The lathe has huge outward appearance, I has operated it in the plant practice.
I hold the excited feeling to start lathe worker's first day of practice.
The first day from listens to the technician to instruct the step to start, I listened to each step of the content.
In the technician explains after a paragraph, it was time for us to operate personally, however I fall into a head empty in vain condition.
Why? The lathe in mine front, but my hand with the foot actually did not know where pendulum could toward! Must take the tool first.
After putting up the cutting tool, I fall into the original stupid shape.
One time learns the content have been too many, after the head already did not know the step, was how to meet the step two, thereupon my first day of practice progress seriously fell behind.
The lathe has huge outward appearance, I has operated it in the plant practice.
I hold the excited feeling to start lathe worker's first day of practice.
The first day from listens to the technician to instruct the step to start, I listened to each step of the content.
In the technician explains after a paragraph, it was time for us to operate personally, however I fall into a head empty in vain condition.
Why? The lathe in mine front, but my hand with the foot actually did not know where pendulum could toward! Must take the tool first.
After putting up the cutting tool, I fall into the original stupid shape.
One time learns the content have been too many, after the head already did not know the step, was how to meet the step two, thereupon my first day of practice progress seriously fell behind.
freewriting-About Go Home
Today is the frist day of vacation, I went home at 2:00p.m.
But when I reached home, the time was at 6:00p.m.
I spent four hours to go home!
If I go home by scooter, it will only take 30 minutes!
It was very unbelievable, the difference is so unexpectedly big.
I will not ride the public vehicle again next time!
But I do not have the scooter to ride.
Therefore I must ride the public vehicle to go home...
But when I reached home, the time was at 6:00p.m.
I spent four hours to go home!
If I go home by scooter, it will only take 30 minutes!
It was very unbelievable, the difference is so unexpectedly big.
I will not ride the public vehicle again next time!
But I do not have the scooter to ride.
Therefore I must ride the public vehicle to go home...
Thursday, April 30, 2009
Freewriting-About Plant Practice
In the university first grade the semester plant practice does not have molder this project, therefore I soon start the molder curriculum feels the unusual curiosity and intense.
When hears the molder pours into the mold is not the metal liquid when the liquid state is sacrificial, I feel a little small disappointed and the small happiness.
I was disappointed because I cannot do very much specialized, in order to avoid the danger which happily the metal liquid creates.
The first day of practice is special, everybody makes the practice in the underground two building's factory, but I was arrive at another located at the underground building workshop.
Inside this has chocked up all kinds of equipment, including many instruments is with the molder irrelevant.
After attending class, starts to listen to teacher to explain the entire molder flow, attends a meeting each kind of tool which from the practice equipment uses to have the introduction.
Afterward begins the work has come, I take the big shovel to overturn in the sand pit sand, has turned with the water, is to let the sand even moist.
Like this had finished the first day of work.
The second day of practice is tired, I have shovelled the sand puts in the strainer, and about diligently rotates the strainer, enables the thin sand to fall into my vessel.
Has filled up until the sand, hole has completed, today's end of job, will have taken in the third day the model.
The third day of practice is joyful, careful the shovel falls likely the brick bat same soil block from the model, in moistens the full sand the model to take away washes cleanly.
This is a hard sledding work, mounts in the model detail granulated substance unusualreliability, I clear it to white have spent many time.
What a pity had the partial sand already to permeate in the sacrificial mold, therefore clear did not fall.
To sum up, this is a very rare experience!
When hears the molder pours into the mold is not the metal liquid when the liquid state is sacrificial, I feel a little small disappointed and the small happiness.
I was disappointed because I cannot do very much specialized, in order to avoid the danger which happily the metal liquid creates.
The first day of practice is special, everybody makes the practice in the underground two building's factory, but I was arrive at another located at the underground building workshop.
Inside this has chocked up all kinds of equipment, including many instruments is with the molder irrelevant.
After attending class, starts to listen to teacher to explain the entire molder flow, attends a meeting each kind of tool which from the practice equipment uses to have the introduction.
Afterward begins the work has come, I take the big shovel to overturn in the sand pit sand, has turned with the water, is to let the sand even moist.
Like this had finished the first day of work.
The second day of practice is tired, I have shovelled the sand puts in the strainer, and about diligently rotates the strainer, enables the thin sand to fall into my vessel.
Has filled up until the sand, hole has completed, today's end of job, will have taken in the third day the model.
The third day of practice is joyful, careful the shovel falls likely the brick bat same soil block from the model, in moistens the full sand the model to take away washes cleanly.
This is a hard sledding work, mounts in the model detail granulated substance unusualreliability, I clear it to white have spent many time.
What a pity had the partial sand already to permeate in the sacrificial mold, therefore clear did not fall.
To sum up, this is a very rare experience!
Information Association
Speaks of the university, I will think of association!
I am an ordinary university student, participates in association is a very important matter, therefore I have joined school Information association.
I lack in the computer aspect knowledge, therefore I joined Information association, hoped that I may increase many computer aspects the knowledge.
I am very anxious, because in the modern society has many computers, the computer aspect knowledge will not be defeated in the modern society.
This should be the pressure which the science and technology brings!
I am an ordinary university student, participates in association is a very important matter, therefore I have joined school Information association.
I lack in the computer aspect knowledge, therefore I joined Information association, hoped that I may increase many computer aspects the knowledge.
I am very anxious, because in the modern society has many computers, the computer aspect knowledge will not be defeated in the modern society.
This should be the pressure which the science and technology brings!
Subscribe to:
Posts (Atom)